Stamped steel bracket mounts into top or bottom track, fits on Slimfold and others.

N 6701 is a Top mount bi-fold door pivot and guide. Used by Johnson Hardware and other door manufacturers, the spring loaded pivot pin inserts into the pivot bracket above creating a top pivot point for the bi-fold door or it serves as a guide for the end door as it slides back and forth in the track. See N 6844 for the Pivot Bracket.

Bi-fold door guide wheels 7/8 inch outside diameter. Fits cox doors. 1/4 inch width nylon wheel with 7/16 inch outside diameter by 1-1/2 inch height. Nylon base self adjusts from 1-7/8 to 2-1/2 inch in track for smooth guiding of lead door. Card of 2. For 1 inch to 1-3/8 inch thick bi-fold doors up to 30 lbs.

Nylon base; fits Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H nylon base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 pounds each. Nylon base; fits Cox doors. 1/4"W nylon wheel with 7/16"OD x 1-1/2"H nylon base self-adjusts from 1-7/8" to 2-1/2" in track for smooth guiding of lead door. For 1 inch to 1-3/8" thick bi-fold doors up to 30 pounds each.

PRIME LINE BI-FOLD DOOR SOCKET

N 7025 is a set of brass-plated bi-fold door hinges. They are the non-mortise style used by very many bi-fold door manufacturers. Made of stamped steel, the hinges are a flag design. That is, that one hinge extends to the left while the other extends to the right.

1/4 in W nylon wheel on spring-loaded steel shaft with plastic housing that tapers to 3/8 in OD to allow for hammering into drilled hole. Self-adjusts from 1-1/2 to 2 in H.

N 6705 is a spring loaded, 3/4 in square glide or guide in a 3/8 in plastic base. It mounts on the top edge of a bi-fold door that is 1 to 1-3/8 in thick. Used by Alliance Doors and many bi-fold door manufacturers.

N 6696 is a bottom mount pivot used by many bi-fold doors manufacturers. The 7/16 in Dia nylon base houses a grooved pivot tip that screws in or out for adjustment.

For 1 to 1-3/8 in thick bi-fold doors. Top pivot snaps into track socket securing door. Roller guide provides smooth sliding operation of door.

National Hardware Guide Roller, Ball Bearing, Steel, Zinc, For: Folding Door Frames

Adjusts bi-fold doors up or down, left or right. Surface mount for easy installation. Manufactured with cold-rolled steel and nylon.

Steel base; fits Acme and Cox doors. 1/4 in W nylon wheel with 7/16 in OD x 1-1/2 in H steel base self-adjusts from 1-7/8 to 2-1/2 in in track for smooth guiding of lead door. For 1 to 1-3/8 in thick bi-fold doors up to 30 lb each.

Fits on Johnson Hardware doors. Steel bracket with nylon bushing insert to accept pivot pin. 3-1/16 in L x 1 in W overall. Includes two #8 x 1-1/4 in Phillips pan head screws.

NATIONAL PART DOOR FLDG WHITE 48

NATIONAL PART DOOR FLDG WHITE 60